Tap Water Saver Nozzle | Save up to 97%

Made of Brass. Best alternative for Aerators. Propel your water conservation in Home, Kitchen faucets and Bathroom Taps. 

What are Water Conservation nozzles?

Water saving nozzle is a small attachment fitted at the end of the water tap mouth’s thread to save water. TrueMist manufactures and distributes water saving nozzles for taps and faucets.

Water Saving Tap Nozzles come in various forms divides the flow of water into multiple small streams by adding air in between or changing the stream into different formats. As a result, the volume of water flowing from the tap gets appreciably reduced as the water stream is diluted with air. These results in water savings as well as minimize splashing in sinks.

Standard Tap Aerators will not restrict the flow of water, and the water flow is directly proportional to the pressure of the waterline. So, Standard Aerator dispenses anywhere between 8 liters per minute to 15 liters per minute.

We manufacture the best water conservation nozzles in India under the Make in India programme.
Atomizer Dual flow Water Saving Nozzle

Atomizer Dual - Mist & Shower Dual flow pattern Nozzle

Atomizer - Dual Mode is an innovative Dual-mode Water saver Tap Nozzle that alters the water flow into mist and dispenses water to maximize water utilization by saving up to 90%. Just a Pull and Push to switch between fine mist mode and shower mode.

Made of Brass and chrome finished for elegance and durability.

Mist Mode is advisable for vegetable wash, Hand wash, mild soiled plate washing, and rinsing of Vessels.

Shower / Spray Mode is best for Filling glasses, Vessel washing, and Higher water quantity applications.
KNOW MORE
Tap Nozzle Dual Mode Mist Water Saving Nozzle

TrueMist Twister - Dual Mode Nozzle Water Savers

TrueMist Twister is an innovative Dual-mode water saving faucet attachment that alters the water flow into mist and dispenses water to maximize water utilization by saving up to 90%. Just a twist to save water between fine mist mode and shower mode.

Made of Brass and chrome finished for elegance and durability.

Mist Mode is advisable for vegetable wash, Hand wash, mild soiled plate washing, and rinsing of Vessels.

Shower / Spray Mode is best for Filling glasses, Vessel washing, and Higher water quantity applications.
KNOW MORE

True TapShower – Shower flow Nozzle [2, 3 & 4 LPMs]

TrueTapShower, water tap spray nozzle dispense in Shower pattern. Conserving water is the need of the hour as it has an excellent environmental effect and saves a significant amount of money. TrueTapShower  attachment acts as a tap with a showerhead and controls water flow.

Tap Shower is versatile as it fulfills water-saving requirements be it a Kitchen, washbasins, bathrooms, or commercial installations.

We have three models starting from 2 LPM, 3 LPM, and 4 LPM. Made of brass and chrome coated for durability.
KNOW MORE
Mist-water-saver-for-taps

TrueMist – Extreme water faucet mister Nozzle

TrueMist water saver nozzle for taps can be retrofit in an existing tap fixtures and experience extreme water saving.
Saves up to 97% water from tap compared to conventional aerators.

Best suitable for washbasins at commercial establishments.

Suitable for all taps with 22 mm Diameter threaded shells(M22/F24 threaded taps). Comes with an Anti-clogging filter screen to filter sediments and particle.

Experience the mist with low cost under warranty for two years from the purchase date for all water savers made of brass.
KNOW MORE

TrueSpray – Umbrella flow Nozzle  [1 and 2  LPMs]

TrueSpray perfects the flow of water into umbrella spray form, achieving water efficiency.

Conserve up to 87% water with our TrueSpray without losing the tap functionality. TrueSpray comes with 1 LPM and 2 LPM models.

Uniform flow make sure that water spreads throughout the washing area evenly. Since the material is scale resistant, Our water-saving nozzles last longer than conventional aerators and makes economical water tap nozzles.
KNOW MORE

TrueMist ARC – Mist Atomizer Nozzle for Angled Tap

TrueMist uses a unique tap atomizer technique to convert a regular water stream into a fine mist, reducing the water consumption by 97% compared to a standard water aerator.

We have a wide range of TrueMist models to suits your purpose ranging from 300 ml per minute to 800 ml per minute.

TrueMist Arc is best suitable for commercial places like Shopping malls, IT parks, Canteen, hotels, and restaurants.
KNOW MORE

WATER TAP FLOW VS WATER SAVING NOZZLES FLOW RATES

What is mean by Tap water saving aerator and How does it works?

• Since water pressure affects the flow rate, too much water gets wasted in the taps. For Example, When a tap is opened for hand wash, more than 95% of the water bounces off the Users and gets wasted.
• The purpose of water saving tap Nozzles or Tap nozzles is to maintain a constant water flow rate with minimal variation in the flow due to pressure fluctuations. Since water pressure is affected a little, there is hardly any difference in water coming out from an aerated tap. Users can benefit from normal water flow while maintaining water efficiency at the same time. Quantity of bouncing water reduced to a greater extent.
• Tap Nozzles water savers are of use, especially with older taps which typically supply around 8 to 15 liters of water per minute. A Water Saving Nozzle for tap can help cut the water flow by up to 97% (i.e., just 300 ml per minute) compared to standard aerator flow.
• Water tap Nozzles can be installed on 95% of taps, and as per estimates, their use can save up to 2500 liters of water in a month.
• Water Saving Nozzles are alternatively called as Water Conservation Nozzle, Water brass Nozzle, Tap Spray nozzle, Faucet spray nozzle, Faucet spray mist nozzle, tap mist nozzle, water saver nozzle, etc..

What are the available Water Saving Nozzle flow patterns?

Various flow patterns are available in water saver nozzle like Shower flow(Shower stream/Spray), Umbrella flow(Hollow cone flow where the water spray like a cone), and  Mist flow (Breaking up of water particles into tiny particles and jets like a mist).

What are the available water saving Nozzle Flow rates?

• TrueTapShower – Shower flow Nozzle – 2, 3 & 4 LPMs
• TrueSpray – Umbrella flow Nozzle – 1 and 2 LPMs
• TrueMist – Mist flow Nozzle – 300 and 500 ml per minute (Standard Models)
• TrueMist Twister – Dual mode nozzle – Mist & Shower flow pattern
• TrueMist Arc – Mist flow Nozzle – 500 ml per minute (Standard Models).

Advantage of our Nozzles

• Made of complete brass, which is known for its durability and CP coated.
• Multiple water saving nozzles types which can saves up to 97% water.
• Converts a standard tap to a water saver tap.
• Highly customization with Quality.
• 2-year replacement warranty.
• Various flow patterns.
• Adapter for Various threads sizes (Both Internal and External Threads)
• Economical and competitive pricing. (Lowest in the industry).
• Works both in Pressurized water piping systems (With pressure pump booster) and Pressure-less system (Gravity pressure piping system).
It is manufactured with ISO 9001:2015 certification.
• Extensive distribution network in India.
• We manufacture water saving nozzle under Make In India program.

What are the benefits of installing a faucet water saver nozzles?

Saves water. A faucet aerator and nozzle can significantly reduce the amount of water you use in your home. The amount of water you can save depends on the type of aerator you install, but Nozzles are available that restrict the faucet flow rate to below 300 ml per minute (0.3 LPM).

Filters out debris. The water saving nozzle screen can trap small debris that would otherwise have made it out of your tap. Although water saving Nozzles can get clogged with debris, calcium, and limescale, you can easily remove and clean them.

 Prevents splashing. Without a Nozzle, water would come out in one significant stream and splash all over the place. By dividing the water into streams and slowing down the flow rate, an aerator can reduce splashing out of the faucet.

Shapes Your Faucet Water. Faucet Nozzles are also used to shape the water stream that it was coming out of your sink. It helps create a straight, evenly pressured water stream.

Increases Perceived Water Pressure. While faucet Nozzles do cut down on the amount of water that you are using, it creates a buildup of high pressure in your tap fixtures right behind the Nozzles. This is particularly helpful in homes that have low water pressure.

General Specification:

All standard Greenly water conservation / saver nozzles have a thread size of M24(Outer), and the Adapter rings will be suitable for taps with M22 Size(Tap thread will be Outer. So the adapter will have thread inside)
Tags: water saving tap nozzle | tap water saver nozzle | water saver tap attachement | water faucet mister | kitchen tap water saving nozzle | Water conservation nozzle

Showing all 23 results

Quick Links
Delivery InformationTerms and ConditionsPrivacy PolicyShipping PolicyDisclaimerReturn and cancellation policy
Our Products
Misting  SystemWater Saving ProductWater Saving NozzlesWater Saving Tap Aerator
Get In Touch
+91 90430 76479+91 94442 75778+91 93630 47778greenly@greenly.co.in
 Copyright © 2023 | Synergy Automatics | All Rights Reserved | powered by Ingenium Digital
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram