Your shopping cart is empty!
Here are some details of water saving aerator for taps.
What are Tap aerators ?
Tap Aerators are small attachments that are fitted at the end of water taps mouth or can be inserted inside the spout and can act as a water saving aerator for tap.
Aerators come in the form of mesh screens that divide the flow of water into multiple small streams by adding air in between. The volume of water flowing from the tap gets appreciably reduced as the water stream is diluted with air. This results in water savings on tap and aerators also minimize splashing in sinks.
Normal Aerators will not restrict the flow of water and the water flow is directly proportional to the pressure of the water line. so, Normal Aerator dispense anywhere between 8 liters per minutes to 15 liters per minute.
What is mean by Tap water saving aerator and How does it works?
Since water pressure affects the flow rate, too much of water gets wasted in the taps. For Example, When a tap is opened for hand wash, more than 95% of the water bounces off the Users and gets wasted.
The purpose of water saving aerator for taps or Tap flow regulator is to maintain a constant rate of water flow with minimal variation in the flow due to pressure fluctuations. Since water pressure is affected a little, there is hardly any difference in the amount of water coming out from an aerated tap. Users can benefit from normal water flow while maintaining water efficiency at the same time. Quantity of bouncing water reduced to a greater extent.
Areator are of use especially with older taps which typically supply around 8 to 15 liters of water per minute. An aerator can help cut the water flow by less than half or even 90% i.e. 1.2 liters of water per minute.
Aerator can be installed on 95% of taps and as per estimates, their use can save up to 1200 liters of water in a month.
Water Saving Aerator is alternatively called as Water Conservation Filter, Water plastic Nozzle, Tap filter, Tap Flow restrictor, Tap flow regulator, Tap Nozzle, Foam flow filter, faucet aerators, faucet tap filter, etc..
How Greenly water saving aerator is different form cheap water aerator?
Cheaper water aerators for taps are mostly made of recycled plastics or normal plastic material which can leach in to food and water and may cause cancer. Recycled plastic aerators have chemicals like Bisphenol A (BPA) dioxins which may be released when plastic water aerators are used with normal water and it should be completely avoided with heated water.
Greenly water saving aerators are made of Poly-Oxy_Methelene which is know for its durability under various environment is best suited as water aerators.
What are the available Water Saving Aerator flow patterns?
Various flow pattern models are available in water saving aerator like Shower flow(Shower stream/Spray), Laminar flow(non-splashing solid stream), Aerated flow (Air mixed with water spray) and Mist flow (Breaking up of water particles into tiny particles and sprays like a fog)
What are the available water saver aerator Flow rates?
Shower flow Aerator - 2, 3 & 4 LPMs
Laminar flow aerator - 4 and 6 LPMs
Aerated flow aerator - 6 and 8 LPMs
mist flow aerator - 1.2 LPM
Advantage of our Aerators:
What are the benefits of installing a faucet aerators?
Saves water. A faucet aerator can greatly reduce the amount of water you use in your home. The amount of water you can save depends on the type of aerator you install, but aerators are available that restrict faucet flow-rate to below 1.5 litres per minute (LPM).
Filters out debris. The screen in the aerator is able to trap small debris that would otherwise have made it out of your faucet. Although aerators can get clogged with debris, calcium and limescale, you can easily remove and clean them.
Prevents splashing. Without an aerator, water would come out in one big stream and splash all over the place. By dividing the water into streams and slowing down the flow rate, an aerator is able to reduce splashing out of the faucet.
Shapes Your Faucet Water. Faucet aerators are also used to shape the water stream that it coming out of your sink. It helps create a straight, evenly pressured water stream.
Increases Perceived Water Pressure. While faucet aerators do cut down on the amount of water that you are using, it actually creates a buildup of high pressure in your faucet right behind the aerator. This is particularly helpful in homes that have low water pressure.
Fits into most standard Indian taps with nozzle diameter 22 mm.
Dimensions: 22mm Male or Female Brass adapter rings
If your tap size is not a standard size? We can manufacture customize Water saving nozzle for your requirement. Please visit our water saving nozzle page for more details.
How I can choose my Water Saving Aerators?
Choose based on the purpose. Your choice should be based on your tap mouth angle, Pressure at tap point, Main purpose of the tap where its getting installed, Water Usage.
How about Maintenance of Water Saver aerators?
Aerators occasionally need to be rinsed out since sand and particulate can build up at the filter and restrict the flow. Plan to replace water aerator for taps periodically to maintain good performance. It is advisable to replace tap aerators every 2 years.
If I can save water by opening tap cautiously, Why I need water saving aerator?
If a tap is always used only by one user, then it make sense to go without water saving components. but Almost all the taps are used by more than one person, so it make sense to go with water saving products.
My Tap doesn't have thread, but want to save water. Any alternative available?
Yes. Flow Controller / restrictor for taps can be used. Due to maintenance over heads its advisable to replace the tap.
Still have queries? Please call +91 94999 72778 or write an email to Contact US